Comgrow Robo CNC Dust Collector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This simple design of a dust collector for the Comgrow Robo CNC fits around the mounting block of the z axis step…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple design of a dust collector for the Comgrow Robo CNC fits around the mounting block of the z axis step motor. There is still some work in progress as with the vibration the collector moves a bit up.
I have created a possibility to simply add a transparent sheet into the half circle as you can see in the picture. There is a small gap foreseen in that circle.
The hose I used is a 25 mm hose and I have created a connector to direct the hose near the end mill. The connector fits into the laser slot.
The 25 mm hose is connected to the cyclone that I printed from the following design. https://www.thingiverse.com/thing:1447214
To fit the cyclone I have created an adapter as well.
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
No
Supports:
No
Infill:
20
Filament:
Esun PLA+
black
Category: Machine Tools