PGA168 (Socket 1/2/3) CPU Storage Case

Protective storage case for PGA168 (Socket 1, Socket 2, and Socket 3) CPUs.

The case holds a single CPU and snaps closed without screws. The top and bottom have openings, so the model name and other markings can be read without opening the case.

Features

• Fits PGA168 Socket 1, 2, and 3 CPUs

• Snap-fit closure, CPU front markings remain visible when closed

• Secure fit keeps the CPU firmly seated when closed

• Optional two stacked PCB inserts for supporting and protecting the CPU pins

Optional PCB Inserts

The PGA168 version has two optional PCB inserts: a lower insert and an upper insert. The two stacked PCB design accommodates the pin shoulder present on the base of the four inner corner pins.

Your options are to use no PCB, the lower PCB only, or both lower and upper PCBs.

Separate manufacturing ZIP files are provided for the upper and lower PCBs. They must be ordered separately from JLCPCB/PCBWay, as each is a different PCB design.

Each PCB design is panelized in a 2 × 2 layout under 100 × 100 mm, providing four inserts per panel. A typical five-panel order therefore provides 20 inserts. For example, my JLCPCB orders cost $2 plus $1.20 shipping per design. Shipping and import fees may vary by country.

After manufacturing, snap the four panelized inserts apart at the small breakaway bridges and lightly sand the remaining tabs.

The PCBs are intentionally a tight press-fit. Align each insert carefully and press it evenly into place. If needed, use a small plastic or wooden intermediary piece and gently tap it with a hammer until fully seated.

Printing Settings

Designed in Fusion 360 and test printed on a Prusa i3 MK3S+ using PETG.
50% infill recommended. No supports required.