PGA168 (Socket 1/2/3) CPU Storage Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.34 – €1.63 net (excluding VAT)
For file: PGA168_0.2mm_PETG_MK3S_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.49 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Snap-fit protective storage case for PGA168 CPUs compatible with Socket 1, Socket 2, and Socket 3.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Protective storage case for PGA168 (Socket 1, Socket 2, and Socket 3) CPUs.
The case holds a single CPU and snaps closed without screws. The top and bottom have openings, so the model name and other markings can be read without opening the case.
Features
Fits PGA168 Socket 1, 2, and 3 CPUs
Snap-fit closure, CPU front markings remain visible when closed
Secure fit keeps the CPU firmly seated when closed
Optional two stacked PCB inserts for supporting and protecting the CPU pins
Optional PCB Inserts
The PGA168 version has two optional PCB inserts: a lower insert and an upper insert. The two stacked PCB design accommodates the pin shoulder present on the base of the four inner corner pins.
Your options are to use no PCB, the lower PCB only, or both lower and upper PCBs.
Separate manufacturing ZIP files are provided for the upper and lower PCBs. They must be ordered separately from JLCPCB/PCBWay, as each is a different PCB design.
Each PCB design is panelized in a 2 × 2 layout under 100 × 100 mm, providing four inserts per panel. A typical five-panel order therefore provides 20 inserts. For example, my JLCPCB orders cost $2 plus $1.20 shipping per design. Shipping and import fees may vary by country.
After manufacturing, snap the four panelized inserts apart at the small breakaway bridges and lightly sand the remaining tabs.
The PCBs are intentionally a tight press-fit. Align each insert carefully and press it evenly into place. If needed, use a small plastic or wooden intermediary piece and gently tap it with a hammer until fully seated.
Printing Settings
Designed in Fusion 360 and test printed on a Prusa i3 MK3S+ using PETG.
50% infill recommended. No supports required.