Counting matching models…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
I wanted better temps for my system so i modded a duct for fresh air intake and a mount for 2x 120mm fans in the bottom. For the 2x 120mm Fan shoud in the bottom you need to cut out some parts that are in the way and also need to remove…
This is a work-in-progress and will be changing frequently!!! Forethought I designed this Control Box in 2018 out of the need for one. All the cases I found were specific to one machine and one mainboard. So if I wanted to change the…
CPU box for 6 pieces of Athlon/Phenom (Socket AM2) One file with both pieces (top and bottom). Print separately as depicted on the screenshot. I invite for to visit my webpage with links to social profiles and other computer activities at…
Simple CPU-shroud for the Microserver. You can simply plug it onto the radiator. You will need the following parts: 2 x Fan 40x40x10 (recommended: BlackSilentFan 40mm XM2) You can also use thicker fans 8 x M3x10mm Cylinder head bolts 8 x…
Box for 20 CPUs on sockets: AM2 AM3 mPGA754 mPGA939 FM1 FM2 FR5 and more 40x40mm CPUs
A nice and simple, low-profile case to display or store Haswell CPUs that should also fit back in the original CPU box in case you lost the original packaging. May work on some other CPU sizes but I have not tested that. Print Settings…
Modified the CPU holder to fit a Socket G1 (i7-620M).
The screw holes should enable a flush surface to mount to. I left the brim on because I think it looks good. Printed in PLA 0.1mm layer height
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…
This 3D model is a custom-designed top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit…
The case of one of my USB-A thumbdrives broke and I didn't wanted the thumbdrive to have its PCB exposed. So I created a replacement case that looks like the T800 CPU Sarah Conner removes from the Terminators skull. Printed with tough…
Cooler used: https://a.co/d/gyw5dgC In my testing I went from 92c max to 72c max. Use the intel brackets (longer ones) to mount to the 3d Printed adapter. M4 nut and bolts for mounting.
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
Fits AXP90-X53 Full + Fractal Ridge perfectly.
A tray and cover to protect the CPU pins on the LTT recycled CPU fidget spinner with holes in place to still be able to spin the fidget while protected as well as thumb holds to make it easily removable. It's a friction fit so you don't…
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
This is a set of models for organizing and storing Intel Xeon server CPUs for easy reference and access. As a long-time homelabber, I've assembled quite a collection of CPUs from various generations, and organizing and storing them has…
WARNING: The mounting holes are still a bit off, you must modify the CAD model yourself if you want to attempt this, as I no longer have the time to continue this project. Introduction Based off DigiKey part 2299806-1. The original STP…
Einfache Bodenplatte für USB-Vakuum-Saugstift für IC- und CPU-Chips mit einstellbarer Saugkraft mit zubehör…
I have make place to use wire clips for cpu fan and saw that I have didn't had space for ram module. I could make offset or make smaller. I choice to make smaller It fits perfect for me. Category: 3D Printing
Designed some replacement spacers for the SilverStone Hydrogon D140 ARGB CPU cooler. They should be pretty darn close to the originals dimensionally. I still have my originals but the geometry was simple enough to whip these up for anyone…
This fan, https://www.printables.com/model/299994-xj99c-noctua-nf-a12x25-mod is probably a better all round fan unless you need more flow at higher backpressure. Recommend 0.15-0.2mm layers, any filament, probably need support. Putting…
This is my take on display stand for older CPU's. The stand is very stable when cpu is inserted in holder. If cpu does not stay in the holder use a piece of double sided tape. Supports are only needed in the hollow section of the part.
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
Kabel sollten immer irgendwie geführt werden. Hierfür ein kleines Teil was das CPU Kabel an der Seite festhält. Benötigt wird: 1x Einschmelzgewinde/Short m3 1x m3 6mm bisschen 1mm Moosgummi (optional)
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
The screw holes should enable a flush surface to mount to. I left the brim on because I think it looks good. Printed in PLA 0.1mm layer height
Easy to print shroud for NH-L12s to improve exhausting hot air OUT of the case. Print in ABS/ASA or other heat resistant material. Requires spacer under power supply cable in order to fit, for example THIS (tested). 2025/02/14 - I've…
A Cpu Case to hold old Cpu's (designed for a 2004 Intel PENTIUM) Layer height: 0.2 Infil: Not Important Material: Creality Hyper Pla-CF Support: No Printer: K1C
Modeled somewhat after another CPU cover I've got with another motherboard.
A very small remix of Dawnaur's original CPU Delid tool. I made the square "track",or overhang that the delidder slider runs between, into a wedge shape. This negates any need for supports and makes the printing of the the parts very…
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
I used Arctic Cooling 40mm fans and the supplied screws to fit. Uses existing mounting holes in Supermicro chassis.
This model was designed for Asus Prime AP201 ATX (mATX) case, and some big tower CPU cooler, like Thermalright Peerless Assassin 120 etc. Size 120x120 (12cm) like 12cm fan. 65mm (6.5cm) height - can be modified (scaled in Z-axis) in your…
Adjusted in tinker cad using online size guides and a ratio calculator
El Microprocesador Z80 fue lanzado al mercado en 1976 por Zilog y ha sido uno de los microprocesadores de mayor éxito, debido a su uso en los Amstrad CPC y Sinclair ZX Spectrum . Aún se utilizan derivados suyos en sistemas empotrados. El…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
I have designed this thinking about creating a visual way of RGB colors to have the temperature of my CPU I have used an RGB LED strip for the motherboard using one of the RGB connectors, (Using OpenRBG) I give this LED strip the colors…
Stand for Intel Haswell-E CPUs like i7-5930K Broadwell-E should fit as well, but i cant test this.
The following 3D model depicts the architecture of a 8086 Microprocessor. Print with any materials that you want using the parameter suggested from filament producer. I suggest to use a 0.4mm nozzle.
Its a holder for AMD AM5 CPUs. I tested it with an AMD Ryzen 5 7600. There also is a blank Fusion360 file, in case you want to adjust the sled for your needs. If you want do make the sled yourself, its 50x50x7mm with a 75° dovetail on the…
Reddit post: https://www.reddit.com/r/sffpc/comments/1glr5zc/my_first_sff_builddownsizing_did_i_do_it_right/ The duct is designed for 10mm gap between the cooler and the side panel, which should be in the 4th spine configuration. After…
this works with pentium cpus, i have not tried any others but it could work with them is they are the same size or smaller/
Need four M2x3mm or super glue Print settings: Turn on support 0.2mm layer height
The better airflow can reduce your CPU temperatures by 10-15°C. Right now it is printed in ASA and CPU reaches 48°C normal browser use. If your case reaches high temps i suggest printing in PETG, ASA or ABS. More details follow after…
An official 3d model by Cooler Master combined with fan made maelstrom gangster from cyberpunk game. i printed it using transparent Esun resin on Anicubic photon mono4k Happy Cyberpunk2077 update 2.2 !
this ia a right side vent for a c64x case with a dynatron a18 cpu cooler this get the air out of the case quickly, but you lose the usb ports on that side. works good for me and makes a nice hand warmer when cold lol
I designed this mount for a project I am doing which involves tearing apart the electronics from an old drone and placing them into a model car. Therefore I needed a small, modular, lightweight but simple design to hold the CPU in place,…
This is a development of my previous CPU mount which now incorporates a battery tray, switch, status LED and 4K camera spaces allowing for a more streamlined and completely modulated design of any products you wish to design and build.…
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Display stand for your CPUs, 2 versions one for normal CPU and one for delidded CPU. (Testen on a ryzen 7 1700)
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
This model isn't perfect and was my first time modeling a print in place live hinge. I printed it in pla and it seems to work fine. The long narrow edges bow away from the case due to stress after folding. I'd recommend changing the hinge…
Lightweight and durable holder designed for showcasing 50x50 mm CPUs. Perfect for collectors or enthusiasts, this compact and ventilated stand ensures your old or unused processors are displayed securely and stylishly. Its minimalist…
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
Overview: I made this to store my old Intel desktop CPUs after a model I found didn't have quite enough space for the small “nubs” on the back of some of them. This model uses a more open design that allows for some variation in…
This model is very thin and fragile so I recommend a relatively fine layer height and slow speed for best results. This will pay off though, because the stand will be barely visible and low profile. Everything between 0.2 and 0.05mm…
They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…
This my version of a Amiga 3000 CPU Card Spacer / Stand-off. The reason I create this version it's will allow us to use a longer screw clamping CPU card to the motherboard and screw in the chassis filling the space needed like the…
I have lots of old CPU's laying around… In an attempt to organize and protect the pins, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for an AMD AM2 Socket. Printed with…
I have lots of old CPU's laying around… In an attempt to organize them, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for an Intel LGA775 CPU (sometimes called Socket…
I have lots of old CPU's laying around… In an attempt to organize and protect the pins, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for an Intel Socket 478 CPUs. Printed…
I have lots of old CPU's laying around… In an attempt to organize and protect the pins, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for an Intel Socket 478 CPUs. This is…
I have lots of old CPU's laying around… In an attempt to organize and protect the pins, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for AMD S1 CPUs such as the Athlon 64…
Modified the holder to fit a Intel FCLGA1356 CPU (XEON E5-2420V2)
Intel Celeron D346 processor keychain The processor has an LGA775 socket. Printing parameters: material: PLA/PETG temperature: 200°C-230°C speed: 60mm/s layer: 0.2mm infill: 100% supports: yes nozzle 0.4mm Assembly instructions: You need…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
I like old CPUs and I always need magnets on the fridge. As the old CPUs have a lot of pins at the back, I built myself a housing to click the CPU in. The CPUs sit tightly in the holder. There is a 2mm deep cut-out on the back, where a…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
This is a fan holder for the Motorola 68040 CPU for use in Apple Macintosh computers. This bracket is designed to hold both a Noctua NF-A4x10 fan which is a 40mm x 40mm x 10mm fan and a 40mm x 40mm x 11mm heat sink sandwiched together.…
Designed to hold 6 LTT CPU cases https://www.printables.com/model/1191951-ltt-cpu-cases
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
A good way to make use of that old i7 for 2011. This model works with all LGA1366 socket CPU's.
This is an AM5 CPU Secure Frame. It is attached using four UNC 6-32 × 5/16" pan head torx screws. I recommend printing from ABS/ASA, or other material that can withstand higher temperatures long-term.
This is my first projects, so if there is problems, please feel free to give me a heads up or make the changes your self. The top and bottom parts are separerede. Prusa Slicer Size[world]: Top: X 55. Y: 67,01. Z: 6,07. Bottom: X: 55. Y:…
this is a simple rack for team blue cpus 14 slots in total. x1 ,x2 ,x3 support only land grid array (LGA) cpus. x1 is compatible form core 2 duo till the newest core ultra 3, 5, 7 or 9 so this includes almost all core i3 ,i5 ,i7 ,i9…
I bought this USB stick, and removed the housing. https://www.amazon.de/Intenso-Rainbow-Line-USB-Stick-gr%C3%BCn/dp/B001G4QKCG/ref=pd\_bxgy\_147\_img\_2?\_encoding=UTF8&refRID=36XD54J2JGZGBRWSQPQZ&th=1 In my case everything fits together…
Made for a socket 462 AMD Athlon CPU from 1999. I made this in solid edge, it features quite a simple 2 part design which is supposed to be snap fit.
