1 / 2
Qidi Plus 4 Hex Mainboard Cover for 80mm fan with focused ducting for steppers, CPU, MCU — image 1
1 / 2

Qidi Plus 4 Hex Mainboard Cover for 80mm fan with focused ducting for steppers, CPU, MCU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement mainboard cover for Qidi Plus4. 80mm fan sizing with focused ducting for steppers, CPU, and MCU

Rating
5 / 5
Likes
160
Downloads
1,356
Makes
28
Views
4,750
Reviews
29

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Discussion


A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan

This is a variant of my other honeycomb design posted on Thingiverse

This variant positions the fan more centrally over the hottest parts of the mainboard, being the stepper drivers, the Rockchip CPU, and the STM32 MCU.

Included is a printable ducting which may be attached to the fan using M4x12mm machine screws which screw directly into the ducting.

A vaned fan cover is also included to protect the fan inlet from debris.

Best printed with a 0.2mm layer height.  No supports necessary.

A 0.15mm elephant foot compensation over 3 layers is recommended for the honeycomb cover plate.

Any material can be used, but I would recommend filaments that can withstand at least 60C before softening for best long term durability.

 

Support
 

Enjoying my work?  Consider buying me a coffee!    https://ko-fi.com/stew675

Tags