Eryone Cardboard Spool Adapter for Filament Storage 2026
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Eryone cardboard spools to fit the rewinder used in the Filament Storage 2026 system.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
Dimensions used:
Spool Hole Diameter: 55.5
Spool Width: 65.5
Key:
CB = Cardboard
PC = Plastic Closed Center Hub
PO = Plastic Open Center Hub
RS = Reusable Spool
3D = 3D Printed Spool
Print settings:
.20mm Structural
Infill: Gyroid
Supports: None
Source:
Measurements were taken using a digital caliper.
Hole diameter was measured using the inside jaws.
Spool width was measured by placing the spool on the flat surface and using the depth gauge.
In both cases, multiple measurements were taken and averaged.
Photos:
Adapter in spool to make sure it fits
Spool in assembled test lid to make sure it spins freely