1 / 2
Eryone Cardboard Spool Adapter for Filament Storage 2026 — image 1
1 / 2

Eryone Cardboard Spool Adapter for Filament Storage 2026

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter for Eryone cardboard spools to fit the rewinder used in the Filament Storage 2026 system.

Rating
0 / 5
Likes
3
Downloads
19
Makes
0
Views
46
Reviews
0

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

Dimensions used:

  • Spool Hole Diameter: 55.5

  • Spool Width: 65.5

Key:

  • CB = Cardboard

  • PC = Plastic Closed Center Hub

  • PO = Plastic Open Center Hub

  • RS = Reusable Spool

  • 3D = 3D Printed Spool

Print settings:

  • .20mm Structural

  • Infill: Gyroid

  • Supports: None

Source:

  • Measurements were taken using a digital caliper.

  • Hole diameter was measured using the inside jaws.

  • Spool width was measured by placing the spool on the flat surface and using the depth gauge.

  • In both cases, multiple measurements were taken and averaged.

Photos:

  • Adapter in spool to make sure it fits

  • Spool in assembled test lid to make sure it spins freely