Reinforced Latches for Filament Storage 2026 Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw reinforced latches for the Filament Storage 2026 drybox by GunplaMark
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
The model that my remix is based off of improved upon an already great system. In my remix, I incorporated screws into the hinge joints and lengthened the latches. While print-in-place and hardware-less hinges are great and have their many uses, I wanted something a bit more robust that would hold up to long-term use.
This model is designed for M2.5 x 12mm socket screws, with a head diameter of 4.5mm. See this McMaster-Carr listing for reference. You need two screws per hinge, a total of 8 per spool container. The Fusion 360 project file is provided, so that you can easily accommodate whatever screws you have available.
This remix is based off of the "Improved Lid for Original Gasket - WPR" version of the lid. This will likely not work for you if you're using the 3mm foam gasket material, instead of the original molded silicone one.