MTG Undercity Dungeon Tracker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magic the Gathering Undercity Dungeon Tracker
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Open Community License v1.1
This is a Magic the Gathering Undercity Dungeon Tracker made for commander but can be used for any format. It is based on a model from cults3d from Morass https://cults3d.com/en/3d-model/game/mtg-undercity-dungeon-hex-pyramid-prop
There are 2 different versions. The first is a completely flat version. This is so you can print just one file on a textured build plate. In your slicer change the part "base" to the color of choice so you can see the different rooms.
The second is in two files. The first print is 3d Board which is the board with a small indention for the walls. Again the part "base" is the one you will want to change to have the different colors. I printed with petg supports for an easy removal of supports if you are printing on a textured bed. The second file is the walls. You will want to change the parts "grout1" thru "grout5" to the color you want to show the different bricks and grout. You might need to slightly sand the ends of the interior walls as my printer had a little over extrusion but only took a minute each.
The pin I would highly suggest turning it on its side and printing it with supports. If you do not the layer lines will not run long ways and you can easily break apart a pin in the peg holes.