1 / 5
Side Holder for Anycubic Kobra S1 Combo 3DLAC & Isopropyl Alcohol + Fire Jet Blower — zdjęcie 1
1 / 5

Side Holder for Anycubic Kobra S1 Combo 3DLAC & Isopropyl Alcohol + Fire Jet Blower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for Isopropanol bottle, 3Dlac and flame jet blower on the side of the printer Anycubic Kobra S1

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a simple side mount that sits on the floor next to your Anycubic Kobra S1 Combo and tucks right against the printer’s frame. It keeps three workshop essentials within arm’s reach: a jet blower lighter, a 3DLAC adhesion spray bottle, and an isopropyl alcohol bottle for cleaning. The design is intentionally minimal – you just place the part on the ground and press it gently against the printer body. If you want a more permanent setup you can add a few drops of glue.

The holder uses three through-holes with loose, friction-based clearances so you can adjust fitment easily:

  • 87 mm for the alcohol bottle

  • 52.9 mm for the 3DLAC bottle

  • 29.5 mm for the jet blower lighter

All dimensions are nominal; a light press-fit or ~0.1–0.2 mm interference is easy to achieve by scaling the model in your slicer. The geometry is open and printable flat on the bed with no overhangs.

Files included: Shapr3D project and STEP file so you can resize holes, spacing, or overall shape for your own bottles.

Tagi