Side Holder for Anycubic Kobra S1 Combo 3DLAC & Isopropyl Alcohol + Fire Jet Blower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for Isopropanol bottle, 3Dlac and flame jet blower on the side of the printer Anycubic Kobra S1
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a simple side mount that sits on the floor next to your Anycubic Kobra S1 Combo and tucks right against the printer’s frame. It keeps three workshop essentials within arm’s reach: a jet blower lighter, a 3DLAC adhesion spray bottle, and an isopropyl alcohol bottle for cleaning. The design is intentionally minimal – you just place the part on the ground and press it gently against the printer body. If you want a more permanent setup you can add a few drops of glue.
The holder uses three through-holes with loose, friction-based clearances so you can adjust fitment easily:
87 mm for the alcohol bottle
52.9 mm for the 3DLAC bottle
29.5 mm for the jet blower lighter
All dimensions are nominal; a light press-fit or ~0.1–0.2 mm interference is easy to achieve by scaling the model in your slicer. The geometry is open and printable flat on the bed with no overhangs.
Files included: Shapr3D project and STEP file so you can resize holes, spacing, or overall shape for your own bottles.