1 / 4
Swarm Trap Door — zdjęcie 1
1 / 4

Swarm Trap Door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A ventilated door for swarm traps

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have never liked the round dial type of door used on most swarm traps. It seems like no matter what its stuck and I need a hive tool to turn it. By then the bees are upset and starting to let me know about it. I designed this to never get stuck. The wood can swell and the bees can put as much propolis on it as they want. I made it extra thick so if its stuck you just give the end a slap and its closed. I made it so its easy to use with gloves. When installing it on your trap use the four screws to adjust how loosely the door slides open and close. I tighten them just enough for the door not to slide closed while hoisting it up into a tree. Prints without supports. Place the flat sides on the build plate. I recommend petg or similar outdoor filament, and 25% gyroid infill, with 3 perimeters. See it on an active inbound swarm here. 

Tagi