Wyniki wyszukiwania: trapdoor

Trapdoor spider

A Trapdoor spider. Category: Toys & Games

Dice Tower with a spring loaded trapdoor

Want to add some extra excitement to your board games? Well, here you go: a Dice Tower with a spring loaded Trapdoor! This is a very simple print, and all you need is a printer, a 4mm(ish) pen spring, and a 20-25mm M3 bolt. The bolt is…

Amiga 1200 Custom Trapdoor remix

I wanted a tighter fit on my own A1200 as when I printed the original part in Formfutura White ABSpro it fit ok, but there was a bit of movement and rattle. Perhaps there is some shrinkage on the ABS that causes this, if printing with PLA…

Trapdoor Latch

Easy and simple trapdoor latch... Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: bq EasyGo PLA Green Category: Household

Die! Dice Tower with Trapdoor

I made this Die!-Tower for boardgames to make rolling the dice even more fun. Stack them up and let them fly with the push of a lever. Printing instructions: For a fast print, you can go down to 15% Infill for the Tower. Use 100% Infill…

Amiga 500 expansion trapdoor

Amiga 1200 ventilated latched trapdoor cover

I printed a couple of Amiga trapdoor designs and found they break easily. This one has a latch that turns and does not require the plastic to flex when being inserted or removed, and I'm still using my first one. The latch and the drive…

INDX Filament tube automatic trapdoor

Introduction First: This has not been tested at large scale yet. I would be curious to hear from anyone who tries it for a print with a large (1000+) number of toolhead changes. In my in-machine testing, it takes about 300 tool changes…

Amiga 1200 Indivision AGA MK3 VGA Trapdoor

Amiga 1200 trapdoor for Indivision AGA MK3 VGA port PCB. Remix from https://www.thingiverse.com/thing:4609489

Amiga 500 expansion trapdoor

A1200.net rear trapdoor for Indivision AGA MK3

This is a rear trapdoor and a holder frame for the HDMI output of the Individual Computers Indivision AGA MK3 on an Amiga 1200. The design is specially made for A1200.net replica cases, and may not work for classic Amiga 1200 cases. It…

Amiga 1200 Trapdoor Cover with Cut-out for ACA1221ec Heatsink

Remix of dvoelkel's v4 design on Thingiverse (https://www.thingiverse.com/thing:1887963) to add space for a ACA1221ec heatsink. Printed at 0.3mm layer height in ABS with supports. Used textured steel sheet for nicer surface finish (see…

Amiga 500 TrapDoor switch

Amiga 500 Trapdoor 2 switch for 1Mo chip Ram. Mini Interrupteur à Bascule: https://www.amazon.fr/dp/B0BTM3WQXN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M3 Vis:…

Amiga 500 Trapdoor Cover

Modelled to resemble the original part as closely as possible.

Commodore Amiga 600 (A600) Trapdoor

didn't find a model in the web, so i decided to make my own version. have fun… :) Print Settings Printer: Prusa MK3S+ Rafts: No Supports: Yes Resolution: .2 Infill: 15% Filament: PETG Category: Video Games / Retro Computer / Commodore Amiga

Amiga 1200: Blizzard PPC Trapdoor Cover

Remixed as original wasn't long enough to latch in trapdoor, needed to make hole for PPC fan as it was stopping the trapdoor from sitting flush, also the latch wasn't high enough and has been replaced with the latch from the trapdoor by…

INDX tube automatic trapdoor 10mm magnets

Description - look at original. Use trapdoor part from the original. 5 of 8x3 magnets replaced by 10x3 or 10x2 magnets alternative added clearance from trapdoor magnet (file names include "chamf") bigger hole for imbus

Amiga 1200 Trapdoor Cover

Modelled to resemble the original part as closely as possible. Original is P/N: 364912, Rev: B

Playmobil Castle Trapdoor Hinge

While model 773920 (playmobil-castle-trap-door) is a full new trapdoor, I opted to replace only the hinges. I removed the old, broken hinges using a knife and then glued the new ones in place. (And yes, the white looks not-so-good on the…

Amiga 600 Trapdoor Cover

Modelled to resemble the original part as closely as possible. Original is P/N: 363899 T2

Amiga A1200 trapdoors

In my A1200 I have a PIStorm32-lite with CM4. I find it convenient to be able to eject the microSD for backups. In developing the trapdoor I am using it went through three stages: plain (to get the dimensions and latch right), for…

Medieval Trapdoor Box with Hidden Tray

This medieval-style box hides a small storage tray beneath a mechanical trapdoor lid. Turning the side wheel lifts the trapdoor, revealing the compartment inside while keeping the exterior looking like a solid wooden structure. The…

BEST TCP: Trapdoor #BESTRobotics2025

Prusa 3D Printing National Challenge Entry #BESTRobotics2025 Allen High School - Allen Eagle Robotics #0058, Collin County (CoCo) BEST Hub Model Description Function The function of this part is to use gravity in order to sort between…

Amiga 1200 back trapdoor CF slot V2 - Siliconix

Amiga 1200 back CF port for "CF-IDE44/2.0mm ADAPTER V.H2 DMA/Panel LED/4 Assemble holes."

Amiga 500 TrapDoor switch

Amiga 500 Trapdoor 2 switch for 1Mo chip Ram. Mini Interrupteur à Bascule: https://www.amazon.fr/dp/B0BTM3WQXN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M3 Vis:…

Playmobil Castle Trapdoor Hinge

While model 773920 (playmobil-castle-trap-door) is a full new trapdoor, I opted to replace only the hinges. I removed the old, broken hinges using a knife and then glued the new ones in place. (And yes, the white looks not-so-good on the…

Amiga 500 Trapdoor Cover

Modelled to resemble the original part as closely as possible.

Amiga 600 Trapdoor Cover

Modelled to resemble the original part as closely as possible. Original is P/N: 363899 T2

Amiga 1200 Trapdoor Cover

Modelled to resemble the original part as closely as possible. Original is P/N: 364912, Rev: B

Amiga A1200 trapdoors

In my A1200 I have a PIStorm32-lite with CM4. I find it convenient to be able to eject the microSD for backups. In developing the trapdoor I am using it went through three stages: plain (to get the dimensions and latch right), for…