Floorstanding Loudspeakers (Focal SopraAC InspirAed) – Hi-End Acoustic Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Floorstanding Loudspeakers (Focal SopraAC InspirAed) – Hi-End Acoustic Enclosure
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is not just a standard print – it is the ultimate challenge for your 3D printer and a dream come true for audiophiles! This project features massive floorstanding loudspeakers, with a design heavily inspired by the legendary Focal Sopra line.
The structure is a highly advanced acoustic system, standing approximately 1040 mm tall, engineered for a very specific set of high-end drivers. To make the fabrication process as easy as possible, the model has already been professionally split into modules perfectly fitting print beds of at least 300x300 mm. The assembly boasts extreme rigidity (one speaker at 80% infill consumes about 40 kg of ABS filament!), virtually eliminating cabinet resonances. The package also includes real-world acoustic measurement graphs of the completed set.
Key Features:
Pre-Cut Modules (300x300 mm): The project is split and optimized for large-format printers. The minimum required build volume is 300 x 300 mm.
Custom Driver Fitment: Mounting holes are perfectly tailored for:
Woofer: STX W.18.180.8.FCX_v2
Midrange: STX M.15.250.8.FCX
Tweeter: Audison AV1.1
Advanced Acoustics: The woofer operates in a powerful band-pass enclosure, while the midrange driver is housed in its own isolated sealed enclosure for pinpoint vocal accuracy.
Monumental Scale & Weight: 1040 mm in height and roughly 40 kg per piece. This is heavyweight Hi-Fi equipment.
Proven Performance: Included in the files are acoustic measurement graphs of the finished speaker.
Printing & Assembly Tips 🛠
Mandatory Material: Strictly ABS or ASA. These provide the necessary acoustic stiffness. Printing such massive blocks requires a printer with a fully enclosed and well-heated chamber.
Infill Strategy: A recommended infill of 80% (e.g., Gyroid or 3D Honeycomb) paired with thick outer perimeters (minimum 6-8 walls) is required to give the modules the mass needed to dampen acoustic resonance.
Module Assembly: For a permanent and airtight connection between the printed ABS blocks, use a dedicated plastic adhesive or chemical welding (ABS juice/acetone slurry). Ensure the speaker chambers are perfectly airtight!