Liczymy pasujące modele…
Printed in Black eSun PLA. 20% infill. NB. Not suited to Prusa Mini @ 100%. Sample printed on Ender 3v2. Laying on back rotated 45deg on bed to fit. (see image supplied of Prusaslicer orientation) Ps. If you MAKE IT and you LIKE IT.…
Alignment package for co2 laser cutters with cloudray c-series head. ********If you are doing this on a FF Y-1200 laser or Y-400 substitute every time I reference the x axis with the y axis and vice versa because they are flip flopped.…
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
The disposable camera lens adapter this is a remix of was able to do 30mm natively, and had parameters to go further out without much issue. For the lens I have, though, I needed it closer to the sensor. I modified the fusion file to…
ALPA Standard Lensboard with focal plane sign
A binocular mount that fits a Focal tripod shoe. Printed in PETG with three perimeters for added strength. The print uses 15% infill from the base up to about where the washer makes contact (at 65 mm). From there up to the top I switched…
This 3D model represents an Apollonian cone, inspired by the studies of the ancient Greek mathematician Apollonius of Perga. The model explores the geometric elegance of a cone with distinctive cross-sectional properties, highlighting the…
DO NOT LOOK AT THE SUN WITH THIS! Also have a look at my improved Dobsonian Design: https://www.printables.com/model/317112-propdob-telescope-foldable-travel-dobsonian-45-mir Hi, this is a Newtonian telescope with a 114 mm diameter mirror…
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
This is a simple microscope objective case I designed to fit Mitutoyo M Plan Apo and similar objectives. There is enough room to house pretty much all 95mm parfocal length objectives and the box is wide enough to fit Excelitas high…
Replaces the center column lifter for the Focal 20-08-47 tripod, but may fit other models. Usable with original crank handle. If the original handle axle pin is too tight of a fit, a common 4d nail cut to length works a treat.
An attempt at making telescope quality optical lenses with a SLA 3D printer! As can be seen in the photos, the resolution was just not good enough. Additionally, there is likely waviness throughout the thickness. Crystal Clear resin was…
Overview This is a more comfortable strap for my Hadenys headphones. It both helps avoid hotspots on my head and also protects the fabric from getting dirty too quickly. The variants I made 4 variations of the theme - the shorter variants…
This is a Little Eyepiece making with a D:25mm F:40mm lens for Google Cardboard Vr. This eyepiece is very cheap. The lens cost like 1 Dollar for the pair. You just need to make sure that the lens have 25mm of diameter
Used for both practical and educational purposes, this gauge block can be used to get a close starting point to further adjust focal length for both surface and depth cuts for three different lenses. The three lenses are: 1.5 inch or 38.1…
Increased the model's inner diameter to 45mm to accomodate a larger adaption, but without affecting the original threaded section. Minor adjustments are possible if needed. I've included the blender file if you want to have a go at it…
to replace the stock speakers in a 2011 ram 1500 in the dash with a set of focal flax 3 inch speakers
The disposable camera lens adapter this is a remix of was able to do 30mm natively, and had parameters to go further out without much issue. For the lens I have, though, I needed it closer to the sensor. I modified the fusion file to…
This is a wedge shoe mount thing for my Focal tripod. I could have sworn I had downloaded it from thingiverse, but I also have the openscad file, and it doesn't look like anyone else wrote it, so here it is. Instructions You'll need a…
I didn't want to drill holes on the wall in my basement for the center speaker. So I made a stand which you can put on the top of your TV like a webcam. I used an acrylic rod for the main articulation but you can 3D print it. I used two…
I lost mine so I whipped up a new focal guide for my AlgoLaser engraver. I will make a more authentic one shortly that fits properly on the holder at the buck but its suitable for confirming the focus of the laser as it is 30mm. It can be…
I have a few old camera tripods with quick release heads that were similar but different enough that the adapters wouldn't interchange. So I designed an OpenSCAD model that allows creating a customized adapter that can fit both. You can…
I created a jig to attach to my caliper and adjust height from a flat surface until i got the spot size as close to focus as I was able, then looked at available lens focal lengths. Then ordered replacement lenses for our autofocus metal…
A replicated structure fused together - abstract art. Designed to print without supports. Please select "Like" if you collect or download. Category: Math Art
CAUTION: MAY CAUSE EYE DAMAGE OR FIRE. USE AT YOUR OWN RISK! Update 6: 12/15/2021 I printed out three parts: alternate_border6, triangle5, and alternate_border_hub_small_hole. I hadn't noticed it earlier but I found a fitment issue…
CAUTION: MAY CAUSE EYE DAMAGE OR FIRE! USE AT YOUR OWN RISK! Update 1 12/15/2021: I noticed a perimeter alignment error for adjacent sections of the array due to the outer base perimeters being too wide that will prevent adjacent array…
Notes update - Redesigned from scratch after a few test prints. The blocks on the edges didn't quite close around my phone with it aligned on the eyepiece. Also, it couldn't handle phones like samsungs where the camera was in the middle.…
Holder for distance to ortur laser module lu2_4_LF I used double sided tape to attach it
A GoPro mount that fits a Focal tripod shoe. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Filament: Any brand and color of PETG Notes: I printed at 20% infill, and it works…
A Pixel 6a mount that fits a Focal tripod shoe. The phone clip is designed to hold a Pixel 6a wearing a Google case. The two-part design allows printing with no supports. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
I just started working on my DIY camera lens build and wanted to verify that my focal length calculations were correct, so I made up a quick jig to test! There are 2 teloscoping tubes, one tube has a feature that fits on the camera mount,…
For my eyepieces I had to use the following spacer to reach parfocal: 20mm - None 15mm - Use 1.8mm spacer 9mm - Use 2.0 6mm - Use 2.2 I suggest printing all the sizes and take it with you on a clear night to test out. Takes a bit of trial…
Exactly what it says on the tin, this is a parfocal ring for 1.25 eyepieces. They will need a 20mm M3x0.5 screw and nut added after. Unlike a lot of the aluminum ones these won't gouge the outside of your eyepiece.
update 230709 added Mamiya CS as camera mount (ZIP got updated) ______________________________________ This system of modular lens caps consists of two components - an inlay that connects to the lens and a cap with a punch-out of your…
Phone Light Focalizer. This device makes phone lights more centralized and brighter. I will be adding more designs later
For this variation, I added a cross in the center so it is still focalized, but has shape.
This simple tool is designed to adjust the focus distance on a standard Raspberry Pi Camera. I've made this tool a little longer and narrower than the official focus adjuster that came with the camera to allow me to clear the camera mount…
I purchased budget FPV googles (Echine EV800) and the focal distance was very wrong for my very good eyes. I don't wear glasses and have no vision problems. So, I wasn't sure why I had a hard time focusing on the display with these…
Parfocal ring for 1.25" eyepieces. Only 3mm thick. An M3 square nut is needed, which can be pressed in place with a soldering iron. The plastic thumbscrew head is the “M3_Hex_bolt.STL” from RemiRafael's Handles for M3 to M6 bolts and…
With some minor modification to the camera itself, this focal ring can be installed to allow for adjustable focal length. This allows to focus on closer objects like those on your print bed. I printed this in Overture Black PETG 0.4 mm…
Capture mesmerizing celestial beauty with our Ø114mm Bahtinov Mask. Achieve precise focus on stars and planets for breathtaking astrophotography. Elevate your stargazing experience by ensuring perfect clarity. Upgrade your telescope setup…
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
Do you need a chamber to grow biological material and still retain the ability to look at it under a microscope? Then maybe inspire yourself from this design. It is a simple cuvette and lid that you have to seal at the bottom with a…
Just a little holder for your focal stick on the side of your fiber laser, or where ever you want to place it. Has a 6.3mm hole for 6mm screw. It only have place for one focal stick so that you dont mix your sticks together, only have the…
The filter tags can be backed with velcro and be attached to matte boxes etc. These filter tags are useful to see, at a glance, what is in the matte box or what lens is attached to the camera.
I designed and printed this stand for my Focal SHape 40 monitors. The aim was firstly to raise them slightly and then to have an angle to direct the sound correctly to me (the angle here is 20°). The idea was also to be able to use the…
My Focal tripod broke. No parts were available, so I 3D printed a new bracket. Since tripods of different brands are similar, this bracket may work for many brands.
Adapter plate for the Focal Brand camera tripod (commonly sold at Kmart). This is not designed to hold a mounting screw captive (I used ¼-20 x ¾). I printed with PETG. Print several and mount each of your gadgets to one to bring new life…
Revision 0.6 - RMS male better toleranced, Z axis up, add height and logo, added M25 This is a set of parfocal extenders and adapters for microscope objectives. 1) They have RMS thread, both male and female. It is also called "DIN"…
