Focal Tripod - Pixel 6a Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Pixel 6a mount that fits a Focal tripod shoe.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
A Pixel 6a mount that fits a Focal tripod shoe. The phone clip is designed to hold a Pixel 6a wearing a Google case.
The two-part design allows printing with no supports.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm - 0.1mm
Infill:
15%
Filament: Any brand and color PETG
Notes:
I used a small trick to print the clip's overhangs with no support -- starting at 13.6mm I switched from 0.2mm layers to 0.1mm layers. This creates smaller overhangs, and allows each layer to cool off a little more before the next layer is applied.
The clip's tab snaps into the base. But because the locking tabs are small, you can pull it apart with a little effort. I put a few drops (DROPS) of Gorilla Glue into the bottom of the slot before snapping in the clip to create a more permanent assembly.
I printed in PETG for flexibility. The print uses 15% infill, and it works great; but, I also used four perimeters to effectively create a solid clip. The honeycomb design saves material, increases flexibility, and is esthetically pleasing.
Category: Mobile Phone