Focal Tripod - Pixel 6a Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.53 – €1.87 net (excluding VAT)
For file: Pixel 6a Focal Tripod Mount_0.4n_0.2mm_PETG_MK3S_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.70 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.82 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Pixel 6a mount that fits a Focal tripod shoe.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 47
- Makes
- 0
- Views
- 550
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
A Pixel 6a mount that fits a Focal tripod shoe. The phone clip is designed to hold a Pixel 6a wearing a Google case.
The two-part design allows printing with no supports.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm - 0.1mm
Infill:
15%
Filament: Any brand and color PETG
Notes:
I used a small trick to print the clip's overhangs with no support -- starting at 13.6mm I switched from 0.2mm layers to 0.1mm layers. This creates smaller overhangs, and allows each layer to cool off a little more before the next layer is applied.
The clip's tab snaps into the base. But because the locking tabs are small, you can pull it apart with a little effort. I put a few drops (DROPS) of Gorilla Glue into the bottom of the slot before snapping in the clip to create a more permanent assembly.
I printed in PETG for flexibility. The print uses 15% infill, and it works great; but, I also used four perimeters to effectively create a solid clip. The honeycomb design saves material, increases flexibility, and is esthetically pleasing.
Category: Mobile Phone