Maluch dashboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's dashboard from a 1986 Fiat 126p (old model); the old one had a radio built in, but this one just has a storage
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
My original dashboard was cracked and the cut-out for the radio had been done by a DIY enthusiast; as I’d decided not to have a radio, I made a whole new dashboard with a compartment for my mobile and wallet
I printed it in sections, even though the model is a single piece, due to the build volume of my printer (Prusa CORE1+). The material specified in the print file is BuddyASA, although I’m using ASA from DevilDesign (this configuration profile has worked well for me on several occasions), I used M3x20 screws and NOVATIT two-component adhesive from NOVATO to assemble the parts; the finished surface has been sanded with 400-grit sandpaper and sprayed with a clear plastic primer; the top coat is two layers of black acrylic paint