Maluch dashboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's dashboard from a 1986 Fiat 126p (old model); the old one had a radio built in, but this one just has a storage
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
My original dashboard was cracked and the cut-out for the radio had been done by a DIY enthusiast; as I’d decided not to have a radio, I made a whole new dashboard with a compartment for my mobile and wallet
I printed it in sections, even though the model is a single piece, due to the build volume of my printer (Prusa CORE1+). The material specified in the print file is BuddyASA, although I’m using ASA from DevilDesign (this configuration profile has worked well for me on several occasions), I used M3x20 screws and NOVATIT two-component adhesive from NOVATO to assemble the parts; the finished surface has been sanded with 400-grit sandpaper and sprayed with a clear plastic primer; the top coat is two layers of black acrylic paint