1 / 33
Modular Bee Hornet Guard / Bienen-Maulkorb / Frelon Asiatique — zdjęcie 1
1 / 33

Modular Bee Hornet Guard / Bienen-Maulkorb / Frelon Asiatique

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular, tool-free hornet guard to protect bee colonies from the Asian hornet. Adjustable width, prints without support.

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

🔄 Changelog / Updates

[DE] Update (Rev 1):

  • Die Gitteröffnungen des Deckels wurden überarbeitet und optimiert. Die alte Datei wurde durch die neue Version Deckel-73 Rev 1.stl ersetzt. Alle anderen Komponenten bleiben unverändert.

[EN] Update (Rev 1):

  • The grid openings of the lid have been revised and optimized. The old file has been replaced by the new version Deckel-73 Rev 1.stl. All other components remain unchanged.

[FR] Mise à jour (Rev 1):

  • Les ouvertures de la grille du couvercle ont été révisées et optimisées. L'ancien fichier a été remplacé par la nouvelle version Deckel-73 Rev 1.stl. Tous les autres composants restent inchangés.


🐝 Modularer „Bienen-Maulkorb“ gegen die Asiatische Hornisse (Vespa Velutina)

Schütze deine Bienenvölker vor der Asiatischen Hornisse (Vespa Velutina)! Dieser modulare „Bienen-Maulkorb“ dient dazu, die gefürchtete Flugparalyse der Honigbienen zu verhindern, die entsteht, wenn Hornissen direkt vor dem Flugloch jagen. Durch das Gitter können deine Bienen sicher ein- und ausfliegen, während die Hornissen auf Abstand gehalten werden.

✨ Highlights & Features

  • Modularer Aufbau: Erstelle genau die Version, die du brauchst – egal ob mit offenen/geschlossenen Seiten, Böden oder in Breiten von 200 mm bis 400 mm.

  • Werkzeugloses Stecksystem: Der „Bienen-Maulkorb“ lässt sich ohne zusätzliche Hilfsmittel montieren und demontieren. Perfekt, um die Einzelteile außerhalb der Saison extrem platzsparend einzulagern.

  • Dauerhafte Halterung: Die Halter verbleiben das ganze Jahr an der Beute (für Holz- und Kunststoffbeuten geeignet). Der eigentliche „Bienen-Maulkorb“ wird bei Bedarf einfach ein- und ausgehängt.

  • Optimiert für Standard-Druckbetten: Alle Einzelteile sind so dimensioniert, dass sie problemlos auf ein 250 x 210 mm Druckbett passen (z. B. Prusa MK3/MK4).


⚙ Druckeinstellungen (Print Settings)

Für eine optimale Stabilität, Witterungsbeständigkeit und einen fehlerfreien Druck ohne Support, verwende bitte folgende Parameter:

  • Material: PETG (dringend empfohlen wegen UV- und Witterungsbeständigkeit im Außenbereich)

  • Stützstrukturen (Supports): NEIN – das Modell druckt komplett ohne Support!

  • Wichtige Slicer-Einstellung: Die Brückenfüllrichtung (Bridging angle) muss zwingend auf 45° eingestellt werden!

  • Düse (Nozzle): 0,4 mm (oder 0,6 mm für schnelleren Druck)

  • Schichthöhe (Layer Height): 0,3 mm (für die erste und alle weiteren Schichten)

  • Infill: 20% (Standard-Infill-Muster wie z. B. Gitter/Grid oder Gyroid)

  • Wandlinien (Perimeters): 3

  • Obere/Untere Schichten (Top/Bottom Layers): 3


🛠 Montagehinweis

  1. Befestige die Halter mit Schrauben (3 mm Durchmesser) an deiner Beute.

  2. ⚠ Wichtig: Zieh die Schrauben nur ganz leicht handfest an, damit der Kunststoff der Halter nicht platzt!

  3. Hänge den fertig zusammengesteckten „Bienen-Maulkorb“ einfach in die Halterung ein.

  4. ⚠ Wichtig für die Praxis: Verschließe das reguläre Flugloch der Beute außerhalb des Maulkorbs, sobald dieser montiert ist. So stellst du sicher, dass die Bienen ausschließlich den geschützten Tunnel des Maulkorbs als Ein- und Ausgang nutzen.


🐝 Modular Bee Hornet Guard against the Asian Hornet (Vespa Velutina)

Protect your bee colonies from the Asian hornet (Vespa Velutina)! This modular guard is designed to prevent the dreaded flight paralysis of honeybees, which occurs when hornets hunt directly in front of the hive entrance. The grid allows your bees to fly in and out safely while keeping the hornets at a distance.

✨ Highlights & Features

  • Modular Design: Create exactly the version you need – whether with open/closed sides, bottoms, or in widths from 200 mm to 400 mm.

  • Tool-Free Assembly: The guard can be assembled and disassembled without any additional tools. Perfect for space-saving storage during the off-season.

  • Permanent Mounts: The brackets remain on the hive all year round (suitable for both wooden and plastic hives). The actual guard can be easily attached or removed at any time.

  • Optimized for Standard Print Beds: All individual parts are dimensioned to fit easily on a 250 x 210 mm print bed (e.g., Prusa MK3/MK4).


⚙ Print Settings

For optimal stability, weather resistance, and error-free printing without supports, please use the following parameters:

  • Material: PETG (highly recommended for UV and weather resistance outdoors)

  • Supports: NO – the model prints completely without supports!

  • Important Slicer Setting: The Bridging angle must be set to 45°!

  • Nozzle: 0.4 mm (or 0.6 mm for faster printing)

  • Layer Height: 0.3 mm (for the first and all subsequent layers)

  • Infill: 20% (Standard infill pattern like Grid or Gyroid)

  • Perimeters: 3

  • Top/Bottom Layers: 3


🛠 Assembly Instructions

  1. Attach the brackets to your hive using screws (3 mm diameter).

  2. ⚠ Important: Tighten the screws only very lightly by hand to prevent the plastic brackets from cracking!

  3. Simply hang the fully assembled guard into the brackets.

  4. ⚠ Practical Tip: Close the hive's regular entrance outside of the guard once it is mounted. This ensures that the bees exclusively use the protected tunnel of the guard to enter and exit.


🐝 Protection modulaire contre le frelon asiatique (Vespa Velutina)

Protégez vos colonies d'abeilles contre le frelon asiatique (Vespa Velutina) ! Cette protection modulaire est conçue pour éviter la paralysie de vol des abeilles, qui survient lorsque les frelons chassent directement devant l'entrée de la ruche. La grille permet à vos abeilles d'entrer et de sortir en toute sécurité tout en maintenant les frelons à distance.

✨ Points forts & Caractéristiques

  • Conception modulaire : Créez exactement la version dont vous avez besoin – qu'elle soit avec des côtés ou des fonds ouverts/fermés, ou dans des largeurs de 200 mm à 400 mm.

  • Assemblage sans outil : La protection s'assemble et se démonte sans aucun outil supplémentaire. Parfait pour un stockage très peu encombrant en dehors de la saison.

  • Fixation permanente : Les supports restent sur la ruche toute l'année (adaptés aux ruches en bois et en plastique). La protection elle-même peut être facilement installée ou retirée à tout moment.

  • Optimisé pour les lits d'impression standards : Toutes les pièces individuelles sont dimensionnées pour s'adapter facilement à un lit d'impression de 250 x 210 mm (par exemple, Prusa MK3/MK4).


⚙ Paramètres d'impression

Pour une stabilité optimale, une résistance aux intempéries et une impression sans problème et sans support, veuillez utiliser les paramètres suivants :

  • Matériau : PETG (fortement recommandé pour la résistance aux UV et aux intempéries en extérieur)

  • Supports : NON – le modèle s'imprime entièrement sans support !

  • Réglage important du Slicer : L'orientation du remplissage des ponts (Bridging angle) doit impérativement être réglée sur 45° !

  • Buse (Nozzle) : 0,4 mm (ou 0,6 mm pour une impression plus rapide)

  • Hauteur de couche (Layer Height) : 0,3 mm (pour la première et toutes les couches suivantes)

  • Remplissage (Infill) : 20% (Motif de remplissage standard comme Grille/Grid ou Gyroïde)

  • Périmètres (Perimeters) : 3

  • Couches supérieures/inférieures (Top/Bottom Layers) : 3


🛠 Instructions de montage

  1. Fixez les supports à votre ruche à l'aide de vis (3 mm de diamètre).

  2. ⚠ Important : Serrez les vis très légèrement à la main pour éviter que le plastique des supports ne se fende !

  3. Il suffit de suspendre la protection entièrement assemblée dans les supports.

  4. ⚠ Conseil pratique : Fermez l'entrée régulière de la ruche à l'extérieur de la protection une fois celle-ci montée. Cela garantit que les abeilles utilisent exclusivement le tunnel protégé pour entrer et sortir.


💬 Feedback & Support

[DE] Dir gefällt das Design? Dann lass gerne ein Like ❤ und einen Kommentar da! Ich freue mich riesig über dein Feedback, Anregungen zur Verbesserung oder ein Foto von deinem fertigen Druck (Make).

[EN] Do you like this design? Please leave a Like ❤ and a comment! I would love to hear your feedback, suggestions for improvement, or see a photo of your printed guard (Make).

[FR] Vous aimez ce design ? N'hésitez pas à laisser un Like ❤ et un commentaire ! Je serais ravi de recevoir vos retours, vos suggestions d'amélioration ou de voir une photo de votre impression (Make).

Tagi