Bed Cover for INJORA IR60 SCX24 Hard Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed cover for the INJORA IR60 SCX24 body. It snaps into place and requires no glue or screws.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bed cover for the INJORA IR60 SCX24 body. It snaps into place and requires no glue or screws. You can print the whole thing as one piece or two separate pieces depending on your setup. I printed this on a Flashforge Adventurer 5M with a .4 nozzle. You can print in PLA but it will probably warp in the sun. I recommend something more heat and UV resistant if you are outdoors a lot. I printed mine at 100% infill and .2mm layer height. The bed cover pops into place from the inside of the body with no glue or screws required.