1 / 3
Frilled Guardian | Frilled neck lizard | Hueforge — zdjęcie 1
1 / 3

Frilled Guardian | Frilled neck lizard | Hueforge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frilled neck lizard | Hueforge

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Frilled-neck Lizard is one of Australia's most iconic reptiles, famous for its dramatic defensive display and unmistakable silhouette. When threatened, it spreads its impressive frill, opens its mouth wide, and stands tall—a spectacular reminder that even the smallest guardians of the outback command respect.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 180x144.05mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm
 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
 Hueforge does not require supports

 #000000 PLA Creality Hyper Black  Transmission Distance: 0.5
 #9e6a4b PLA elegoo Brown  Transmission Distance: 1
 #ff9100 PLA elegoo Orange  Transmission Distance: 7
 #ffffff PLA elegoo White  Transmission Distance: 5.5
 This print uses 4 unique filaments

Swap Instructions:
 Start with Black
 At layer #9 (0.8mm) swap to Brown
 At layer #11 (0.96mm) swap to Orange
 At layer #14 (1.2mm) swap to White for the rest.

Tagi