Frilled Guardian | Frilled neck lizard | Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frilled neck lizard | Hueforge
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Frilled-neck Lizard is one of Australia's most iconic reptiles, famous for its dramatic defensive display and unmistakable silhouette. When threatened, it spreads its impressive frill, opens its mouth wide, and stands tall—a spectacular reminder that even the smallest guardians of the outback command respect.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x144.05mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Hueforge does not require supports
#000000 PLA Creality Hyper Black Transmission Distance: 0.5
#9e6a4b PLA elegoo Brown Transmission Distance: 1
#ff9100 PLA elegoo Orange Transmission Distance: 7
#ffffff PLA elegoo White Transmission Distance: 5.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #11 (0.96mm) swap to Orange
At layer #14 (1.2mm) swap to White for the rest.