Velleman MK138 Thermostat box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had a go with Tinkercad trying to make my first thing and this is what i came up with, needed some scaling in Cura but…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Had a go with Tinkercad trying to make my first thing and this is what i came up with, needed some scaling in Cura but managed to make it work :) if it is not quite right in any way then the files are saved at tinkercad's web site.
I plan to use this along side a mains voltage thermostat that uses a heat light to heat a printer enclosure, when the temperature gets to warm the heat lamp shuts off, this mk138 then turns on an exhaust fan and also a 12v strip light to replace the light from the heat light.
Instructions
I used Tinkercad, never tried designing anything before so this is my first.
Category: Electronics