1 / 7
Stanzvorrichtung (8mm Schaft) für M10-Unterlegscheiben Ø 30 mm / Punching device for 8 mm shank width for M10 washers Ø 30 mm — zdjęcie 1
1 / 7

Stanzvorrichtung (8mm Schaft) für M10-Unterlegscheiben Ø 30 mm / Punching device for 8 mm shank width for M10 washers Ø 30 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

for KUKKO 330-004 number set, 4 mm character height - 8 mm shank width, 58–61 HRC hardness, and 331-004 letter set

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

  gedruckt in Petg                                                                                                                                                              Schichthöhe 0,2                                                                                                                                                              Perimeter 4                                                                                                                                                                      Fülldichte 15%                                                                                                                                                                  Füllmuster Gyroid                                                                                                                                                            keine Stützen

  Benötigt werden:   4x Senkkopfschrauben M3x20 ISO 10642 / DIN 7991 mit Innensechskant                                                           1x Distanzscheibe  Ø30 mit 10,5mm Bohrung und 10mm länge.                                                                                 der genau Durchmesser der Distanzscheibe hat 29,72mm

   ________________________________________________________________

  Printed in PETG                                                                                                                                                                Layer height 0.2                                                                                                                                                              Perimeter 4                                                                                                                                                                      Fill density 15%                                                                                                                                                                Fill pattern: Gyroid                                                                                                                                                          no supports

  You will need:         4x countersunk screws M3x20 ISO 10642 / DIN 7991 with hex socket                                                                  1x spacer washer Ø30 with a 10.5 mm hole and a length of 10 mm.                                                                            The exact diameter of the spacer is 29.72 mm