Stanzvorrichtung (8mm Schaft) für M10-Unterlegscheiben Ø 30 mm / Punching device for 8 mm shank width for M10 washers Ø 30 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for KUKKO 330-004 number set, 4 mm character height - 8 mm shank width, 58–61 HRC hardness, and 331-004 letter set
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
gedruckt in Petg Schichthöhe 0,2 Perimeter 4 Fülldichte 15% Füllmuster Gyroid keine Stützen
Benötigt werden: 4x Senkkopfschrauben M3x20 ISO 10642 / DIN 7991 mit Innensechskant 1x Distanzscheibe Ø30 mit 10,5mm Bohrung und 10mm länge. der genau Durchmesser der Distanzscheibe hat 29,72mm
________________________________________________________________
Printed in PETG Layer height 0.2 Perimeter 4 Fill density 15% Fill pattern: Gyroid no supports
You will need: 4x countersunk screws M3x20 ISO 10642 / DIN 7991 with hex socket 1x spacer washer Ø30 with a 10.5 mm hole and a length of 10 mm. The exact diameter of the spacer is 29.72 mm