Desktop Media Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple desktop media storage holder for USB, SD card, and Micro SD cards.
- Ocena
- 0 / 5
- Polubienia
- 62
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
A simple desktop media storage holder for USB, SD card, and Micro SD cards. Nothing fancy, just simplicity. I angled the SD cards slightly to facilitate easier extraction, as the USB sticks can get a little close depending on the size.
The only thing I added was four small grip dots to the underside to stop it slipping around when retrieving the media.
I printed this with a 0.4mm nozzle in PLA, using variable adaptive layers and ironing on the top layer. The other settings are 0.16 layer height, two walls and a 10% gyroid infill. It takes a little extra time to print with these settings, but the end result is worth the time. If you want it quick and don't care about layer lines and stepping, crank it up to 0.24 draft which is what I used for my initial prototype.
This is an upload that I don't care what you do with it. Remix it, sell it, give it away, I don't care. Just have fun with it, and enjoy.