Bosch unlimited series 8 - Vacuum cleaner acessories adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to make a custom nozzle for my vacuum cleaner but could not find details for the interface. So, here it is.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 27/10/2026
I made some further improvements in the spring and its fixation so that gluing is not a must. Just make sure it is well seated at the bottom of the slot.
I extended the small validation model into a fully working male-female tube extension. So, now we have a design for both the male and female interface available. This male-female setup also allowed me to tune the fitting to reduce play.
Also made some improvements in the wide-thin nozzle to improve air flow but I am not yet 100% happy with it
Original text:
I wanted to make a custom nozzle for my battery driven Bosch vacuum cleaner. The goal was to make a nozzle more suitable for the car seats and carpets, that the original nozzles provided.
The issue is that this model (Unlimited Series 8) has a simple lock/unlock mechanism that needs to be reproduced. I have looked around in the open source community but could not find anything for this purpose. Therefore I had to reverse engineer it...
I have measured all the features that I could, without disassemble it (and risk breaking). This mechanism is quite simple and the main difficulty (that required several iterations) was to reproduce the sprint effect of the original design.
My guess is that the engineers that designed this, used a metal spring. I did not had material (or tooling) to make metal springs so I had to improvise with 3D printed plastic.
I have tried to integrate the spring in one of the other two parts but without success. The spring must be printed in layers along its length and thickness, otherwise it tends to break. So, I had to make the sprint an additional part that must be glued to its support.
The design present here, works quite well, although the spring is a bit stronger than the original.
I am posting here the parts (STEP files) I've used to design and validate the interface connection with the vacuum cleaner.
There is an additional STEP file that is the nozzle I made to use in my car. This one works ok but is a little below my expectations regarding performance. This still needs to be fine tuned (bigger opening, maybe less wide, etc.)
Any how the interface adapter with the vacuum cleaner tube is working quite good and the base geometry can be easily be used to make customized nozzles.