NES Cartridge Display Stand - Tip-Out Access
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable NES cartridge display with tip-out access, removable front plate, and easy two-color printing.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A clean, compact, and support-free display stand for original Nintendo Entertainment System (NES) cartridges, designed to keep them easy to see and easy to grab.
Tip-out cartridge access
This stand has a simple tip-out feature. Press down on the top/front of a cartridge and it pivots forward, exposing a corner that is easy to grab.
Separate, customizable front plate
The decorative front is a separate faceplate that locates neatly into place.
It prints flat with the raised logo facing upward, making two-color printing easy even on a single-extruder printer - just add a filament change when the logo begins.
Each ready-to-print size includes both the NES-logo front and a blank front plate, which makes it easy to add your own text or graphics directly in the slicer.
Choose your size
Ready-to-print stands and matching front plates are provided for 4, 6, 8, 10 and 12 cartridges.
The 12-cartridge version is approximately 230 mm wide, so it fits on a 250 mm-wide build plate such as the Prusa CORE One.
If you make a custom front plate or other variation, please share it as a remix - I'd love to see what people do with it!
Recommended print settings
0.4 mm nozzle
0.2 mm layer height
No supports
For the front plate, consider Ironing -> Topmost surface only for a cleaner surface around the raised logo.
The stand is designed specifically for clean printing, with rounded outer corners, no unsupported overhangs, a rear seam trap, and internal geometry separated from the visible perimeter to reduce print artifacts. It should be near-impossible to print it poorly. :)
Assembly
Print the stand and front plate separately.
If printing the logo in a second color, add a filament change at the first layer of the raised text.
Press the finished faceplate into the recessed front of the stand. The locating features align it automatically. The fit is sufficient for positioning, but I recommend a small dab of glue if you want it permanently attached.
Load it with cartridges and you're done. :)
Looking for SNES / Super Famicom?
I also made a stadium-style display for SNES and Super Famicom cartridges, with versions for PAL/EU, North American, and Japanese cartridges:
License and commercial use:
This model is free for non-commercial use under the license shown below. If you'd like to sell printed copies or use the design commercially, please contact me - I'm happy to discuss a separate commercial license.
Nintendo and Nintendo Entertainment System are trademarks of Nintendo. This project is an independent fan-made accessory and is not affiliated with or endorsed by Nintendo.