GamePi XS Remix for HDMI Power
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a Pi Zero inside a SNES controller but have it powered by HDMI. I remixed araymbox's great design but made it…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I wanted a Pi Zero inside a SNES controller but have it powered by HDMI.
I remixed araymbox's great design but made it shorter in height as theres now no battery, its roughly the same size as the standard controller (well at the back anyway)
Theres two versions as before, one with an full size Ext USB port and one without.
I made a few other adjustments, added some internal supports for the two outer screw posts, adjusted the height of the L/R trigger posts so it takes a real SNES controller (does require some light sanding for them to sit flush) and also added another two Pi Zero posts since theres no battery.
Info on how to power by HDMI is here: https://www.sudomod.com/forum/viewtopic.php?f=22&t=2753
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Category: DIY