1 / 1
Olimex ESP32-P4-PC Snap Fit Enclosure — zdjęcie 1

Olimex ESP32-P4-PC Snap Fit Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a completely hardware free snap-fit case for the Olimex ESP32-P4-PC dev board.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

A compact, FDM-friendly enclosure designed specifically for the Olimex ESP32-P4-PC development board.

The enclosure provides a close-fitting PCB pocket, access to the board’s connectors and controls, integrated ventilation, reinforced PCB mounting bosses, and four external mounting tabs for securing the enclosure to a panel or surface. The lid includes integrated button actuators for the onboard controls.

The design has been optimized for standard FDM printing with no supports required in the provided print orientations. Main walls are approximately 1.6 mm thick, with reinforced mounting features and stress-relieved geometry where needed.

Designed around the Olimex ESP32-P4-PC Rev. B board.

Tagi