Headset Holder for 25mm desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is another headset holder for a desk, I wanted a headset holder but struggled to find one due to the way my desk…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is another headset holder for a desk, I wanted a headset holder but struggled to find one due to the way my desk is designed, so made my own. Its a fairly basic design without any frills but works.
The reason I had to design it was mostly because my desk has a big metal rail that runs only 13mm from the edge, so I couldnt have a large section under the desk, to try to help with this I put a hole for a M3 bolt (8-10mm long if you want it to be tidy) to be screwed in underneath to lock against the underside of the desk to give better purchase. Mine is actually plenty stable enough without the locking bolt but its there if you need it.
My desk is 25mm thick too.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
I printed in PLA but PETG and ABS should also work fine.
Category: Computer