Lunyee 3020 Nova Y-axis rail covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple covers to protect the Y-rails from a lot of debris when operating without dust collection.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the Y-axis rails on the 3020 Nova are quite exposed to chips and dust, I designed these simple rail covers to protect them. They're not perfect since chips still tend to hit the rails from the side, but a lot better than nothing.
You'll need a printer with a build area of 300x300mm to print these (diagonally on the bed), but you can always use the Nova itself to machine them out of wood/plastic/aluminum as well.
They just stick on the frame with double-sided tape, though you'll need a reasonably powerful one if your frame isn't assembled properly flush like mine.