Lunyee 3020 Nova Y-axis rail covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple covers to protect the Y-rails from a lot of debris when operating without dust collection.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 114
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the Y-axis rails on the 3020 Nova are quite exposed to chips and dust, I designed these simple rail covers to protect them. They're not perfect since chips still tend to hit the rails from the side, but a lot better than nothing.
You'll need a printer with a build area of 300x300mm to print these (diagonally on the bed), but you can always use the Nova itself to machine them out of wood/plastic/aluminum as well.
They just stick on the frame with double-sided tape, though you'll need a reasonably powerful one if your frame isn't assembled properly flush like mine.