1 / 5
Experimental base plate for Arduino Uno and Raspberry Pi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
During my experiments and test setups with an Arduino or a Raspberry, it always bothered me that the mainboards and…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
During my experiments and test setups with an Arduino or a Raspberry, it always bothered me that the mainboards and the breadboard could slip around loosely.
The result of my considerations was this base plate where an Arduino Uno, a Raspberry Pi and a long breadboard found a fixed place.
Printer settings:
Material: PLA, ABS, PETG etc.
Resolution: 0.2mm
Wall thickness: 0.8 - 1.2mm
Top/Bottmom thickness: 0.8mm
Infill: 15-20%
Support: no
Build Plate Adhesion: Skirt
Category: Electronics