1 / 5
Experimental base plate for Arduino Uno and Raspberry Pi
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
During my experiments and test setups with an Arduino or a Raspberry, it always bothered me that the mainboards and…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 72
- Makes
- 0
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
During my experiments and test setups with an Arduino or a Raspberry, it always bothered me that the mainboards and the breadboard could slip around loosely.
The result of my considerations was this base plate where an Arduino Uno, a Raspberry Pi and a long breadboard found a fixed place.
Printer settings:
Material: PLA, ABS, PETG etc.
Resolution: 0.2mm
Wall thickness: 0.8 - 1.2mm
Top/Bottmom thickness: 0.8mm
Infill: 15-20%
Support: no
Build Plate Adhesion: Skirt
Category: Electronics