Blackmagic UltraStudio Mini Recorder 12G Wall and SKADIS Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the UltraStudio Mini Recorder 12G on a wall or SKADIS-style pegboard while supporting the connected cable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Blackmagic UltraStudio Mini Recorder 12G Wall and SKADIS Mount
Mount the UltraStudio Mini Recorder 12G on a wall or SKADIS-style pegboard while supporting the connected cable beside the device.
Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design
I wanted the recorder off the desk and securely placed on my pegboard, but simply hanging it left the connected cable pulling downward on the port. This cradle holds the recorder from the side and adds a separate rounded cable rest, so the cable weight is carried by the mount instead of hanging directly from the connector.
Key details
Mount body size: 207 x 33 x 70 mm
Two mounting openings: 10 mm diameter
Side-loading cradle for the recorder
Extended rounded support carries the connected cable
Can be installed with wall screws or compatible pegboard hooks
Files included
UltraStudio Mini Recorder 12G cradle with cable support
Important
Compatible pegboard hooks are not included. Use suitable third-party hooks or wall hardware. Confirm the device and connector fit before installation; the cable rest reduces static downward pull but is not a substitute for securing cables against accidental tugs.
Follow me: roqd.one
roqd/m88