1 / 4
CoinHolder for restoring or cleaning coins (ø20mm, 1.5mm thick) — zdjęcie 1
1 / 4

CoinHolder for restoring or cleaning coins (ø20mm, 1.5mm thick)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For clamping coins of ø20mm for cleaning purposes.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For clamping coins of ø20mm for cleaning purposes.
For different sizes resize the parts in your slicer X+Y and possibly Z separately.
THis was printed with support under the clamping jaws, you may inter mix PETG and PLS. I chose PETG - Support from BambuLab. There is a 0.2-0.3mm gap. I printed it with PETG and 0.12mm layerheight.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Tagi