1 / 4
CoinHolder for restoring or cleaning coins (ø20mm, 1.5mm thick)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For clamping coins of ø20mm for cleaning purposes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For clamping coins of ø20mm for cleaning purposes.
For different sizes resize the parts in your slicer X+Y and possibly Z separately.
THis was printed with support under the clamping jaws, you may inter mix PETG and PLS. I chose PETG - Support from BambuLab. There is a 0.2-0.3mm gap. I printed it with PETG and 0.12mm layerheight.
Explore my other Printables: https://www.printables.com/de/@Tritschi