SOG Seal Pup Retention Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix for SOG Sealpup if your retention snap has mysteriously gone missing or is damaged.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a drop in Fix for the SOG Seal Pup that replaces a damaged or lost retention strap.
I would recommend printing this in a semi durable material that has a little bit of flex.
well tuned supports are necessary for the slits under the clips.
recommend printing with 4 walls, 40% infill... but if you wanna print it in solid pa6-cf nobody is stopping you from being the absolute chad that you are.
Install
1) Remove knife.
2) Prepare retention clip insert within the belt loop of the sheath.
3) Slide retention clip insert down until you feel it latch into place against the plastic internal sheath.
Removal
1) Remove Knife
2) Use pliers or other form of gripper to Remove plastic channel for knife
3) Insert either knife or shim down inside of belt loop to release the retention clips backhook.
4) Slide Retention clip insert out.
use should be fairly straightforward
just pull the knife out.
to return the knife to the sheath you may need to press the retention backwards in order for the knife to seat.
Repeat this process a couple of times after initial install to break the new clip in.