Husky 2200-Lumen Tripod Light - Thread Base Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed tripod thread base replacement for the Husky 2200-Lumen Tripod Light.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The thread adapter fell out somehow on my Husky 2200-Lumen Tripod, so I designed a replacement that matches the random M17x1 internal threads and utilized a 1/4-20x3/4" bolt for the screw portion.
Prints in less than 15 minutes and uses just a little over 6 grams of filament. The bolt hub has built in retaining keepers to keep the bolt from falling out.
It is for this light: https://www.homedepot.com/p/Husky-2200-Lumen-Tripod-K40437/325210051#overlay
Print Settings:
0.15 layer height.
2 walls for 0.6mm nozzles & 3 walls for 0.4mm nozzles.
20% Gyroid infill
No Supports
Print with the wide base side down.
Assembly:
Print the thread adapter replacement.
Insert the 1/4-20x3/4" bolt through the top. There are small keeper tags inside the bolt hub, so you'll need to use a hammer or crescent wrench(universal hammer) & a dowel/screwdriver/block to get the bolt head past the bolt keepers.
Slowly thread the adapter to the tripod till it bottoms out.
Light up the Darkness.