Husky 2200-Lumen Tripod Light - Thread Base Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed tripod thread base replacement for the Husky 2200-Lumen Tripod Light.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The thread adapter fell out somehow on my Husky 2200-Lumen Tripod, so I designed a replacement that matches the random M17x1 internal threads and utilized a 1/4-20x3/4" bolt for the screw portion.
Prints in less than 15 minutes and uses just a little over 6 grams of filament. The bolt hub has built in retaining keepers to keep the bolt from falling out.
It is for this light: https://www.homedepot.com/p/Husky-2200-Lumen-Tripod-K40437/325210051#overlay
Print Settings:
0.15 layer height.
2 walls for 0.6mm nozzles & 3 walls for 0.4mm nozzles.
20% Gyroid infill
No Supports
Print with the wide base side down.
Assembly:
Print the thread adapter replacement.
Insert the 1/4-20x3/4" bolt through the top. There are small keeper tags inside the bolt hub, so you'll need to use a hammer or crescent wrench(universal hammer) & a dowel/screwdriver/block to get the bolt head past the bolt keepers.
Slowly thread the adapter to the tripod till it bottoms out.
Light up the Darkness.