Keeb.io Viterbi Hi-Profile Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the Viterbi 2.0 keyboard from Keeb.io. I did not build my keyboard (pictured) with a switch plate and I'm…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for the Keeb.io Viterbi 2.0 split keyboard. I did not build my keyboard (pictured) with a switch plate and I'm not sure if the plate will fit with this case. This design is intended to mount the PCB directly to the screw posts in the case. I used M3x5mm hardware.
The yellow case was printed with a 0.4mm nozzle. Bigger nozzles may not successfully print the outer walls by the port cutouts.
Flip the STL in your slicer for the left half. Enjoy!
(In the photos, it looks like the TRRS jacks are off-center. I can assure you, they are centered just fine.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Category: Electronics