Ridgid 9.6v Battery case for 3S1P 18650 pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a 9.6 v tool. Got a free tool / battery with no charger and a dead NiMH pack and wanted to use the tool.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was given a free Ridgid screwdriver tool - was from the 9.6v era. The battery pack was dead and I didn't get a charger. I built a 3S1P battery pack with 18650's. I used a 3S 40A BMS and a USB C 3S 2A charging board. I pulled the slotted portion from the original battery pack and dropped it into this model.
The tool runs without any problems on the 12v from the battery pack. It ends up being around 2AH depending on the cells you use.
I used double stick tape to hold everything in place.