1 / 3
Distanzplatte Siemens QPA, QFA, QAA, Adapterplatte — zdjęcie 1
1 / 3

Distanzplatte Siemens QPA, QFA, QAA, Adapterplatte

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Distanzplatte zwischen Wand und Fühler Spacer plate between wall and sensor

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Distanzplatte 15mm wird zwischen der Wand und dem Fühler verschraubt um Abweichungen der Temperatur der Wand zu minimieren. 

Der quadratische Zwischenraum kann bei Kabeleinführung von hinten problemlos heraus getrennt werden.

Ansonsten kann dieser Zwischenraum für Drahtreserven verwendet werden.

Passend für die Fühler der Reihen:

Siemens QPA

Siemens QAA

Siemens QFA


A 15 mm spacer plate is screwed between the wall and the sensor to minimize the impact of wall temperature deviations.

The square cutout section can be easily removed if the cable is being fed in from the rear.

Alternatively, this space can be used to accommodate excess wire.

Suitable for sensors in the following series:

Siemens QPA

Siemens QAA

Siemens QFA

Tagi