Mountable Cable Clamp/Hook/Spool/Winding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Cable Clamp to wind up a Pewer Cord
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple, sturdy cable holder that screws to a wall, a desk underside, a rack panel or a workbench and keeps cable bundles where you put them. Two wings span outwards from a central mounting plate, so cables can be slipped in from either side without unplugging anything — no cable ties, no clips to snap off.
The model is parametric so you can change the flap length and width of the clamp. If the version uploaded here does not fit your cables, open the Fusion 360 file, change two parameters and export your own size.
30mm, 40mm, 50mm .3mf's are included.
Print Settings:
Material: PLA or PETG.
Layer height: 0.2 mm
Perimeters: 3
Infill: 25 % or more
For maximum rigidity print with the mounting holes facing the print plate and use support. You can also print it "on the side" to safe support material. See the slicer screenshots.