ZWO OAG-L to Starlight Xpress filter wheel adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter converts allows connecting a ZWO OAG-L to a Starlight Xpress filter wheel (2'').
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
The ZWO OAG-L is a great OAG but its camera-side connector is proprietary; it only connects to the ZWO filter wheel -- I was surprised as it is not obvious from the documentation.
The dedicated ZWO converter to 54mm would add too much thickness in the imaging train when combined with a 3rd party filter wheel.
I designed this adapter to link together the ZWO OAG-L proprietary connector with the Starlight Xpress proprietary connector. In effect, this adapter acts like the native Starlight Xpress adapter, but convert to ZWO instead of a standard thread. The result is only 3mm of additional thickness. If made out of metal, it should be possible to reduce it to 2mm.
Print flange down, using supports. Pop the support out of the screw head holes from the other side.
I joined the FreeCAD model to facilitate the creation of other adapters.