Sennheiser MD441 Microphone clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and elegant clip for the Sennheiser MD441.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
A simple mic clip for the Sennheiser MD441. Prints without supports, requires no post-processing and keeps the adjustment screw hidden.
My goal was to print a clip elegant enough, that it does not look or feel 3D printed.
The surface texture is achieved with fuzzy skin, set for 0.05mm thickness and point distance, with a 0.1-0.125 layer height.
Adjustment feels smooth thanks to no plastic-on-plastic contact
The screw is hidden behind a cover with a hole for the hex bit - remains accessible while being almost invisible
Mounts to a mic stand using a 5/8" to 3/8" adapter, screwed firmly into printed threads - so the threads getting used are all metal
Orca slicer 3mf file included. For other users:
both fuzzy skin thickness and point distance: 0.05mm, painted only (manually paint on the outside surfaces)
0.1-0.125mm layer height, 7 walls
Required hardware:
1x M5x20 button head screw (ISO 7380)
1x M5 washer (can be omitted - use the no-washer base)
2x M5 wide washers (DIN9021)
1x M5 T-nut
1x 5/8" to 3/8" mic thread adapter
Source Fusion CAD files are available and I encourage modifying them for your needs.