1 / 2
Front Derailleur Offset Adapter Shim - 29mm Seat Tube to 34.9mm Bracket — zdjęcie 1
1 / 2

Front Derailleur Offset Adapter Shim - 29mm Seat Tube to 34.9mm Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shift the mounting point of your front derailleur using this mount.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you're struggling with the adjustment range on your front derailleur, you might need to shift the mounting point in or out, especially if you've done a bottom bracket swap.

You will need to print 2x of this design (two halves). It specifically fits 29mm seat tubes mounted to 34.9mm derailleur brackets.

Print at 100% infill.

Tagi