77 modeli
-This is a cover/shield to protect the derailleur of a mountain bike, it uses 3 zip ties and 3M double sided tape to secure it to the swing arm. -(Edit: 25/5/2023) Added the “S” version, it's lighter and has more clearance for the chain,…
Printable UDH hanger. Not sure that I would trust a printed hanger long term but if you need it for a ride and can't get to a bike shop it could be the ticket. I should clarify that this is not a truly universal hanger. Universal…
I made this as a lock is the only thing that Shimano should add to their derailleurs. This is for the 1x12 XT derailleur but looking at the pictures af the other Shimano 1x12 derailleurs it should fit those too. This makes it easier to…
This is a Model for locking the MTB derailleur from Shimano (SLX/XT/XTR) for easy rear wheel change or working on the chain. It is like the already installed lock from SRAM. Changing the gear to the smallest chainring If available turn…
Hello everyone, long time no see. Today I bring you a 3d model of a MTB Shimano rear derailleur, model RD-M592. This wheel is compatible with many more derailleurs, even from other brands. Nevertheless, here are a few important notes: I…
This tool keeps your Shimano 1x12 derailleur cage in place for changing the rear wheel or maintenance. Tested with GRX RD-RX822 and Deore M6100, but should also work with SLX M7100, XT M8100 and XTR M9100 derailleurs. This design allows…
Easy and fast to print C-Clip for your bike brake hose or derailleur / gear cable. Print all five and see which fits best. PETG might be better for outdoor use, but PLA can also last long.
This tool works to keep your Shimano M6100, M7100, M8100 or M9100 derailleur cage held in place for bike maintenance.
The jockey wheel is designed around a 19mm (O/D Dia.) x 7mm (I/D Dia.) x 6mm (W) sealed ceramic cartridge bearing. See the link below. The bearing is also used in other brands of jockey wheels. The bearing is pressed in position, and a…
Shimano Rear Derailleur Pulley For bearing 689ZZ (17x9x5 mm) This model is suitable for upper and bottom roller. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 50% Filament: eSUN…
Park Tool makes the DAG "derailleur alignment gauge" for checking and setting the alignment on a rear derailleur hanger. I've hung these on my pegboard using normal pegboard hooks, but the diameters are different so they don't sit right.…
Had a Campy Super Record front mech with a broken lower brace, so I modeled a new one. Seems to fit pretty darn well, needs a little adhesive around the carbon tab just like the original. Printed first with ASA, but might actually be best…
This is a rear derailleur hanger for my Cannondale Quick CX. Probably won't last forever, but it will get you out of a bind if your rear derailleur hanger is badly bent or broken. Print Settings Rafts: No Supports: No Resolution: .1mm…
I've salvaged bearings and caps from the worn-out Sram X7 derailleur pulleys and they were laying around for years. Original model was 10-teeth, so I've edited SCAD file to make it 11-teeth, printed, press-fit bearings inside and…
This is a variation of the YF007-5 Cable Guide for bicycle frames that use bottom pull front derailleur. Printed with PETG. Looks and feels reliable, but real durability was not tested yet as I don't ride my bike in Winter. Recommended…
Shim that allows use of 31.8 mm clamp FDs on seat tubes with 28.6 mm diameters, no braze-ons. Updates 15 Jan 17: Printed it for the first time. The curvature is slightly too small when you test fit without pressing them onto a 28.6 mm…
I use a Thule Roundtrip Pro XT to travel with my bike. Of the many things it does and comes with, one thing missing is protection of the rear dropouts (135mm spacing 8/9/10/11sp). I designed this rear dropout spacer to protect your rear…
The “fork” who links the two parts of the front derailleur (Campagnolo Record QS of 2007) break sometimes. There is no supply part available from Campagnolo, so I made one. Washer and the screw from the original part. (Original Number…
Shim for 28.6 mm diameter seat tubes to accept 34.9 mm (mountain) front derailleurs. The 28.6 mm diameter may come out a little small, but the print flexes enough to grip the frame just fine. 14 mm tall. I think I made this a long time…
I bike a lot, and have been blowing through derailleur sprockets like once a season. The planar bearings they use don't like the grease I have, so I figured, why not make a sprocket that uses a replaceable 605ZZ ball bearing I have in my…
Shim for 31.8 mm diameter seat tubes to accept 34.9 mm (mountain) front derailleurs. The 31.8 mm diameter may come out a little small, but the print flexes enough to grip the frame just fine. 14 mm tall. Made in Autodesk Inventor.…
Turned out my derailleur tension gear - a part of my bike I newer paid any attention to - is completely worn down. Up to a point where I wasn't able to make out any gears at all or count the teeth or move it with my fingers. Good news…
To adjust the B-screw of the rear derailleur RD-RX820 and RD-RX822. Set the gap between the largest pinion and the guide roller: 34 Teeth - 10mm 36 Teeth - 6mm There is an STL and a STEP version, the shape is the same.
Front derailleur mounts are often oversized for the seat tube of your bike, and the shims provided to make them fit are concentric. This might be OK, but often isn't: Sometimes, you need to move a front derailleur inboard or outboard to…
Remix from "SRAM GX EAGLE Pulley wheel" - I found the teeth to be too wide, wouldn't fit the chain. Also I found issues with printing support…the teeth were not smooth enough after removing the supports. So this is HALF of a pulley wheel.…
A quick and dirty shim design to fit a 34.9mm front derailleur on a bike with a 31.8mm seatpost. This is designed for the Shimano XT derailleur, but will probably work with many others. If the lugs that hold it in place get in the way,…
🚲 Making Wheel Changes a Little Easier Ever struggled to remove your rear wheel on a Shimano 12-speed setup while the derailleur fights back? Yeah — same here. I got tired of wrestling with spring tension every time I needed to clean,…
There are some designs out there trying to solve this problem. But i think that this is the most elegant solution. A way to lock your Shimano rear derailleur Cage. Permanently mounted to your rear derailleur while looking nice. It…
My derailleur hanger been broken by stupid reason and i thought it's a good opportunity to check is it possible to replace it with printed part. I couldn't find pre-made model, so designed it myself. Don't try do it with PLA or PETG, it…
derailleur pulley - 9mm widht - 10.5 mm inner diameter - 10 notches work for my vintage bike for the 2 derailleur pulley I recommand to print in 0.1mm with a 100% filling
Holds your Abbey HAG derailleur alignment tool on pegboard the nicest way - upright. I made several alternatives but this was the only one that looked right and was actually secure. Print both pieces, and put the top retaining clip at a…
A Simpel walmount for my Park Tool DAG-2.2 DERAILLEUR HANGER ALIGNMENT GAUGE
I went online to check the pricing of these plastic parts and could not believe my eyes when I saw a few titanium bolts were lumped in with these plastic bits and it would cost me an arm and a leg. So I decided to model and print these…
This is a simple cover for front deraileur direct mounts. after converting an older bike to a 1x drivetrain, I wanted something to cover the raw aluminum, this is what I came up with. To intall. match up the slot with the matching one on…
In order to assembly and fit position of front derailleur you can use this tool.
This is a new gear ratchet and cable spool for SRAM road bike shifters. It is designed to shift a mountain bike derailleur and 11-speed cassette. It has been tested with an 11-speed SLX derailleur with Sunrace and Shimano 11-speed…
This is an adapter to make a SRAM Double Tap 11-speed shifter work with a Shimano 11-speed road rear derailleur. It replaces the red cable takeup spool inside the SRAM shifter and pulls the slightly smaller amount of cable that Shimano…
This cap was designed to suit my 2014 Trek Fuel Ex 5 to cover the direct mount derailleur hanger. This will likely fit many other models however, has only been tested on the '14 Trek FE5. Test printed in PLA, would recommend other…
Each wheel is printed in two parts from PA or POM (original part material) and glued/bonded to one another with a help of screws tapped into the opposite part. Each wheel requires 606 bearing (17x6x6(h)). Please check exact pocket…
Remixed this Park Tool DAG 2.2 hanger to North American Pegboard spacing
Print it with PETG with no brim, no supports Use an M3 bolt instead of the stock M4 If there are problems with insertion, change the flow rate and reprint
Replacement front derailleur mount for the V3 Salsa Warbird Carbon made between approximately 2016-2019. It hangs lower than the stock to better fit subcompact cranks. I had it printed in stainless steel, and I'm using a GRX 800 front…
Aventon Level.2 comes with this odd-shaped seat tube that prevents easy mounting of an FD -- it arrives as a 1x stock drivetrain took some measurements, found a good way to solidly mount I first tried an E-type FD style, which would be…
Designed this for my Specialized Status 2012 frame to hold 3 cables instead of 2, because I added dropper post with external cable routing. May fit many other MTB frames as well. Designed for 5mm or 6mm bolt mount. Holds two 4mm hoses and…
It's often recommended to have a spare derailleur hanger for your bike, because if it breaks it can take weeks for you to get one. So, before mine broke I measured mine and modeled it in FreeCAD so I can get it machined if need be. I…
I had to get rid of the front derailleur on my bike when I started converting it to an E-Bike. I didn't feel like buying a front crank chain ring, but I also got really annoyed when the chain would inevitably fall onto the lower gears.…
The pulleys for my 1970s gitane racing bike were disintegrating and i couldn't find replacements so i designed my own. I printed them with petg at 0.08mm layer height and 100% infill and glued them together with regular super glue. You…
Description This is the solution for everyone who wants to check or fix their derailleur hanger. Model: The “Messstange” and the endcap are only required for convenience For printing: I would recommend only printing the non-aluminum…
Replacement for the dust protection Rubber sleeve at the cable plug to Shimano XTR Di2 RD-M9050 Rear Derailleur. Printing instructions 0.4 nozzle 0.15mm Structural 100% infill use brim use TPU-95A (flex) filament
Disclaimer: I don't use this derailleur and just took the measurements of the new pulleys in case I ever need them in the future. I use almost the same 3D-printed pulleys for Shimano Deore, they ran more than 5000 km without any issues…
A replacement back plate for Campagnolo 980 rear derailleur snce mine was snapped in half due to previous owner chain rubbing. Not a mechanically stressed part so works pretty well! The threads haven't been modelised, it just screws in…
The plastic knob for the barrel adjuster on Shimano 105 and GRX400 rear derailleurs. I have both derailleurs and have tested the part on them. Unfortunately, I haven't found any other derailleur model that uses this identical adjuster…
SRAM Front Derailleur Shims E1 Group, in 3 variants. The 16.5mm is made for Cervelo Caledonia 5 to fit 43T/30T chain-ring as the derailleur needs to be dropped to the bottom of the hanger. May fit also other brands and sizes. The E1 shims…
This is an easy to make adjuster to straighten bent derailleurhangers. Please refer to YT for explanation of the adjustment process. Please also make sure, your hanger is not bent too much already so that its possibly almost about to…
Custom bottom bracket cable guide designed in Fusion and 3D printed in PETG, 100% infill, for the Specialized Allez. Supports both front and rear derailleur cables and is intended for use with standard shift housing. The front derailleur…
I designed a compact ergot tool designed to remove and install the derailleur hanger nut on Lapierre Aircode frames. This replaces the OEM tool like the one for the nut #00099813 that costs 60 euros :) This print-ready model is meant to…
Derailleur Hanger Adjustment Tool remixed from https://www.thingiverse.com/thing:4653903 . Adjusted to metric parts that are available in Europe: 1x - 20x20x1 mm square Aluminum Tube, about 450mm long 1x - M10 x 1.0 mm thread pitch x 100…
This is a refined version of a plastic 8mm hex to 12mm hex adaptor that comes with Tailfin Universal Derailleur Hanger (UDH) Adaptor (…
Saw other tools that did not seem as durable, or simple- I decided to make this, as a project and to save money (cheapest was $37 on amazon from china 3 stars) Items used and estimate pricing (rounded up to nearest dollar) - 1x ½ iron…
easily press bearings out of aluminum and plastic derailleur pulley/jockey wheels. can be used in a vice, drill press, arbor press, clamp, or you could just smack it with something. made for pressing 9 mm ID x 17 mm OD bearings 11t 13t 15t
The Cyclus Derailleur Hanger Adjustment Tool is a reasonable prices tool with a few shortcomings. First the tip itself is too short. Then: it cannot be freely moved around which makes working with the tool very difficult. I came up with a…
I wanted to be able to display my old derailleurs collection, I needed a support, here it is! Fits all derailleurs with standard mount 10x1.0 old or new Printed in PLA+ black 2 perimeters 0.15mm layer 15% infil No support needed Designed…
This keeps your chain from falling off a single ring setup. There are various STLs which documented the cage profile before I trimmed off the extraneous lines, which I kept in case I want to tweak the profile later. I never use the 52/53…
A failed experiment on how to actuate a rear derailleur with a servo. The servo would be mounted to the barrel adjuster, & a rod passed through the barrel adjuster. The rod would have teeth, & the servo would draw the rod in/out using a…
Replacement derailleur hanger for 2015 Focur Raven carbon bikes. Requires M4 thread drill and M10x1 thread drill. The M10x1 tap is non-standard, with a smaller thread pitch! Recommended printing material: PA12 (nylon), PA12+CF or PA12+GF…
Are you someone who likes pegboard, or someone who can actually be decisive? ;) I loved cmh's HAG holder but hate pegboard. Attach this to your surface of choice with 3mm countersunk screws! There are two bottom files: one is a straight…
This is a simple derailleur cable redirector. Some derailleurs (most notably, the Shimano GRX series) will redirect the end of the cable directly into the wheel requiring you to cut the end of the cable, even if by a measly few…
If you're struggling with the adjustment range on your front derailleur, you might need to shift the mounting point in or out, especially if you've done a bottom bracket swap. You will need to print 2x of this design (two halves). It…
A shim to fit a Shimano FD4500 onto a vintage Schwinn Varsity. I inherited a crusty 1972 Schwinn Varsity from a hoarder neighbor and have been refurbishing it. The front derailleur was missing and a friend gifted me an old Shimano 4500…
The cage lock slots into a cutout in the cage to take the spring tension off the chain, allowing you to remove the wheel and chain without fighting it. Different Microshift derailleurs appear to have different cage geometry, so check…
90° Pivot head for the Toopre TOL -2.3 derailleur alignment gauge. Replacement part for Toopre, also compatible with Park Tool. 1x Countersunk screw M5 1x Socket head cap screw M4 1x rod D6x160 mm
A small frame plug designed for the Twitter M5 bicycle frame . This part closes the unused opening in the frame intended for the front derailleur mounting / cable area . It is useful when the bike is converted to a 1x drivetrain and the…
This is a replacement derailleur hanger for Specialized M2 Pros, from what I found online it'll fit mountain and road. I tested it on my 1994 M2 Pro road bike, unsure if it actually fits anything else. I ended up machining it out of…
In order to assembly and fit position of front derailleur you can use this tool.
There are some designs out there trying to solve this problem. But i think that this is the most elegant solution. A way to lock your Shimano rear derailleur Cage. Permanently mounted to your rear derailleur while looking nice. It…
Are you someone who likes pegboard, or someone who can actually be decisive? ;) I loved cmh's HAG holder but hate pegboard. Attach this to your surface of choice with 3mm countersunk screws! There are two bottom files: one is a straight…
Shim that allows use of 31.8 mm clamp FDs on seat tubes with 28.6 mm diameters, no braze-ons. Updates 15 Jan 17: Printed it for the first time. The curvature is slightly too small when you test fit without pressing them onto a 28.6 mm…
